EVH2025 8th Global Powertrain & Land, Sea & Air Drive Systems Conference - Resolver & Eddy Current Technology Innovation and Application Forum

I. Core Conference Information

• Date: December 4-5, 2025

• Venue: Shanghai

• Theme: Resolver & Eddy Current Technology Innovation and Application

• Scale: Over 1,500 technical experts, enterprise executives, and industry association leaders in new energy vehicle powertrain

II. Conference Background

The new energy vehicle, humanoid robot, and electric ship industries have shown technological development trends of "power electrification, energy low-carbonization, and system intelligence". The penetration rate of new energy vehicles in China is gradually increasing, with comprehensive technological breakthroughs.

Under the global carbon reduction initiative, developing energy-saving and new energy vehicles, humanoid robots, and electric ships has become an industry consensus. This conference focuses on power system technologies, exploring the latest technologies and development trends in fields such as electric drive systems (motors, motor controllers, gearboxes), hybrid power (engines, gearboxes), silicon carbide, electric ships, and humanoid robots.

III. Organizer Background

(I) EVH1000

China's top third-party think tank platform + integrated service provider for the automotive, embodied robot, and low-altitude economy industries. Core services and missions:

• Integrate Industry, University, and Research: Co-host conferences, jointly develop new technologies, build laboratories, and create new products with universities;

• Promote New Technologies: Take promoting new materials, processes, and technologies as the core mission;

• Optimize Supply Chain: Optimize and integrate industrial chain enterprises in segmented industries to meet the cost reduction needs of OEMs;

• Enhance Intelligent Manufacturing Capacity: Provide efficient intelligent manufacturing solutions combined with lean production.

Group Joining Method: Scan the QR code with the note "1000" and actively provide your business card for verification to join the group.

(II) Xuance Technology

A global leader in test and production equipment for angle sensors such as resolvers and eddy current sensors. Core advantages and services:

• Industry Status: The "Resolver Test and Analysis System" developed by its subsidiary Hunan Mi Aixi Measurement & Control has become a new benchmark in the resolver test industry since 2018. It participates in the compilation and revision of 3 national and military standards, and is the only industrial chain service enterprise in China covering the entire process of R&D, production, and application;

• Core Technologies:

• R&D Testing: Angle sensor test system supporting eccentricity, temperature, and high-speed impact analysis;

• Production Testing: Mass production test system supporting eddy current online calibration technology;

• Zero Adjustment Analysis: Mainstream zero adjustment solutions from static multi-point to dynamic zero measurement, and from manual guided zero adjustment to software writing zero position;

• Installation Testing: SmartRIT high-precision angle sensor installation solution;

• Motor Test Bench: Motor test system integrated with angle sensors and NVH;

• Flexible Production Line: Adapt to rapid changes in industry needs, reduce costs and increase efficiency;

• Core Products and Services: Angle sensor test and analysis system, flexible automated production line, zero adjustment equipment, motor dynamic test system, installation test system, test bench, R&D consulting, testing services, and high-end motor/turntable R&D and production.

  
  

IV. Three Domains & Seven Themes

Three Domains

• Air

• Marine

• Land

Seven Themes

1. Air: eVTOL Electric Drive System Theme

2. Marine: Marine Drive System Theme

3. Land: Humanoid Robot Joint Module Theme

4. Land: New Energy Vehicle Powertrain-Chassis Integration Theme

5. Land: New Energy Vehicle Extended-Range Development Theme

6. Land: New Energy Vehicle Electronic Control & Electric Drive System Integration Theme

7. Land: New Energy Vehicle Power Semiconductor Theme

V. Six Highlights

1. Coverage of Land, Sea, and Air Power Domains

2. 1 Large-Scale Closed-Door Meeting on Power Domain

3. In-Depth Dialogue Between OEMs and Suppliers

4. In-Depth Discussions Among Senior Leaders

5. 2 Roundtable Forums for In-Depth Interpretation

6. New Energy Industry Chain Exhibition

VI. Conference Schedule

Date	Time	Agenda
December 4	08:30-12:20 (AM)	Conference Opening Ceremony & Main Forum
December 4	13:30-18:20 (PM)	Main Forum + Parallel Sessions (Robot Joint Modules; Resolver & Eddy Current Angle Sensor Special Session) + Closed-Door Meeting (Advanced Hybrid System Development)
December 4	18:30-21:00 (PM)	Thousand Stars Award Ceremony
December 5	08:30-12:20 (AM)	Parallel Session 1 (Powertrain-Chassis Integration), Parallel Session 2 (eVTOL Electric Drive System), Parallel Session 3 (Power Semiconductor)
December 5	13:30-17:50 (PM)	Extended-Range Development, Marine Drive, Electronic Control & Integration

VII. Distinguished Guests from Government and Enterprises (Partial)

Academic Experts

• Cai Wei: Foreign Member of the Russian Academy of Engineering, Professor of Harbin University of Science and Technology, National Outstanding Engineer (2024)

• Chen Yong: Foreign Member of the Russian Academy of Engineering, Professor and Doctoral Supervisor of Guangxi University

• Wang Qunjing: Fellow of China Electrotechnical Society, Former Deputy Party Secretary & Executive Vice President of Anhui University

• Xu Xiangyang: Professor of Beihang University, Executive Deputy Director of National Engineering Research Center for Passenger Car Automatic Transmission

• Gong Chao: National Young Talent, Professor of Northwestern Polytechnical University

• Lei Guangyin: Researcher of Fudan University, Chief Scientist of Qingchun Semiconductor (Ningbo) Co., Ltd.

Enterprise Executives

• Chen Leshu: General Manager of Xuance Measurement Technology

• Kong Qingbo: Deputy Director of Geely New Energy Technology Center

• Zhang Liang: Deputy Director of Electric Drive System, XPeng Motors

• Fan Jialun: Deputy General Manager & CTO of JEE Power

• Ren Chuanwei: R&D Director of Electric Drive, NIO

• Liang Yafei: Chief Engineer of Electric Drive, BAIC Group Research Institute

• Wang Xiaoming: Chief Engineer of Electric Drive, New Energy System R&D Department, Great Wall Motor Co., Ltd.

• Zhou Xiaoyang: President of Xjune Semiconductor

• Ying Hongliang: Vice President of Shanghai Electric Drive

• Li Qing: Chief Engineer of Energy and Power, Volant Aircraft

• Yu Qiushi: Deputy Chief Engineer of Powertrain Technology, Passenger Car Power Center, Dongfeng Motor R&D Institute

VIII. Detailed Conference Agenda

December 4: Main Venue & Resolver & Eddy Current Technology Innovation and Application Forum

Time	Topic	Speaker	Position
08:30-09:30	Registration & Opening	Host: Cai Wei	Fellow of China Society of Automotive Engineers, Fellow of SAE International, etc.
09:30-09:50	Current Status and Development Trends of Vehicle Electric Drive Technology	Cai Wei	Same as above
09:50-10:10	Development Progress and Trends of Hybrid Power Systems	Xu Xiangyang	Professor of Beihang University, etc.
10:10-10:30	Coffee Break	-	-
10:30-10:50	Geely All-in-One Electric Drive Integration Technology	Kong Qingbo	Deputy Director of Geely New Energy Technology Center
10:50-11:20	Next-Generation Resolver & Eddy Current Testing and Production Solutions by Xuance Technology	Chen Leshu	General Manager of Xuance Technology
11:20-11:40	Development of High-Power Electric Drive AI System	Zhang Liang	Deputy Director of Electric Drive System, XPeng Motors
11:40-12:00	Thermoplastic Composite Solutions for Three-Electric Systems	Zhou Xuanquan	General Manager of Suzhou Napeng New Materials Technology Co., Ltd.
12:00-12:20	Overview of JEE Power System Architecture Development	Fan Jialun	Deputy General Manager & CTO of JEE Power
12:20-13:30	Lunch	-	-
13:30-13:55	Resolver & Eddy Current Standards and Testing	Chen Leshu	General Manager of Xuance Technology
13:55-14:50	Innovation and Development Trends of Resolver & Eddy Current Testing	Luo Chuotao	Deputy General Manager of Mi Aixi Measurement & Control
14:50-15:40	New Technology Development Direction of Resolver & Eddy Current	To Be Confirmed	Guest Speaker from Sensor Factory
15:40-16:00	Coffee Break	-	-
16:00-17:15	Electric Drive Control and Resolver & Eddy Current Application	To Be Confirmed	Guest Speaker from OEM
17:15-18:00	Roundtable Discussion	-	-

December 5: Parallel Session 1 - Powertrain-Chassis Integration (AM) & Extended-Range Development (PM)

Time	Topic	Speaker	Position
08:30-09:30	Registration & Opening	Host: Ren Chuanwei	R&D Director of Electric Drive, NIO
09:30-10:00	Practice of New Energy Powertrain-Chassis Domain Integration in BAIC	Liang Yafei	Chief Engineer of Electric Drive, BAIC Group Research Institute
10:00-10:30	Cross-Domain Integration Development of Chassis Domain	Gao Bojun	Chief Engineer of Calibration and Matching, Power Performance Institute, Changan Automobile Research Institute
10:30-10:50	Coffee Break	-	-
10:50-11:20	Exploration and Practice of Intelligent and Interesting Chassis	Yu Jinxia	Manager of Chassis Electronic Control, JMC
11:20-11:50	To Be Confirmed	General Manager	Sponsor
11:50-12:20	Electric Drive Assembly System Scheme and Key Considerations for Off-Road Platform	Wang Xiaoming	Chief Engineer of Electric Drive, New Energy System R&D Department, Great Wall Motor Co., Ltd.
12:20-13:30	Lunch	Host: Wang Qian	Power Technology Expert, Pre-research Department, SAIC R&D Institute
13:30-14:00	Extended-Range System Technology of Shanghai Electric Drive	Ying Hongliang	Vice President of Shanghai Electric Drive
14:00-14:30	Analysis of NVM Technology for Extended-Range Systems	General Manager	Sponsor
14:30-15:00	Electric Drive Development Technology for Extended-Range Systems	Lu Youjun	Deputy Chief Engineer of Motor Design, Deepal Automotive
15:00-15:20	Coffee Break	-	-
15:20-15:50	New Technology Discussion on AVL Hybrid Drive Systems	Zhang Gonghui	Engineering Director, AVL Tianjin Technology Center
15:50-16:20	Introduction to Dongfeng Power-Split Hybrid System Technology	Yu Qiushi	Deputy Chief Engineer of New Energy, Dongfeng Motor
16:20-16:50	Summary of Development Ideas for Next-Generation Extended-Range Systems	Xia Te	Director of Engine System Institute, R&D Center, Dongan Power

December 5: Parallel Session 2 - Power Semiconductor (AM) & Electronic Control & Integration (PM)

Time	Topic	Speaker	Position
08:30-09:30	Registration & Opening	-	-
09:30-10:00	Application Prospect of Silicon Carbide in Motor Controllers	Zhang Xinglin	Chief R&D Engineer of Electronic Control, Zhixin Technology R&D Center
10:00-10:30	Opportunities and Challenges of Silicon Carbide Industry	Zhou Xiaoyang	President, Guangdong Xjune Semiconductor Co., Ltd.
10:30-10:50	Coffee Break	-	-
10:50-11:20	Application of Silicon Carbide Power Semiconductors in New Energy Vehicle Motor Controllers	Lei Guangyin	Researcher of Fudan University, Chief Scientist of Qingchun Semiconductor
11:20-11:50	Design and Application of Main Drive Modules	General Manager	Sponsor
11:50-12:20	Development of Wide Bandgap Semiconductors (SiC and GaN) by Dongfeng Zhixin	Wang Min	Application Manager, Zhixin Semiconductor Co., Ltd.
12:20-13:30	Lunch	-	-
13:30-14:00	Three-Small-Electric Integration Technology of Sunshine Electric Power	Liu Fulun	Manager of Product Planning Department, Sunshine Electric Power
14:00-14:30	Laser Processing Solutions for Copper Materials in New Energy Vehicles	Peng Yongbing	Industry Manager of Electric Drive and Electronic Control, Wuhan Huagong Laser Engineering Co., Ltd.
14:30-15:00	New Applications of Valeo Electronic Control Technology	Chen Renzhe	R&D Director of Valeo Power China
15:00-15:30	Coffee Break	-	-
15:30-15:50	Architecture and Development of Electric Drive Transmission Systems	Yang Shiqing	Development Manager of Electric Drive Transmission Systems, BorgWarner
15:50-16:20	Application of Power Semiconductor Chip Technology in Electric Drive	General Manager	Sponsor
16:20-16:50	Development Trends of FAW Electric Drive Systems	Liu Lin	Assembly Manager, FAW E-Business Division

December 5: Parallel Session 3 - eVTOL Electric Drive System (AM) & Marine Drive (PM)

Time	Topic	Speaker	Position
08:30-09:30	Registration & Opening	-	-
09:30-10:00	Key Capabilities and Progress in the Development of eVTOL High-Voltage SiC Electric Propulsion Systems	Wen Wencai	Airworthiness Configuration Director, Hefei Junlian Electronics
10:00-10:30	Research on Key Technologies of Electrical Insulation for More-Electric Aircraft	Wang Peng	Professor, Sichuan University
10:30-10:50	Coffee Break	-	-
10:50-11:20	Requirements of eVTOL Configuration and Mission Types for Drive Energy - Turbine Hybrid System	Zheng Weiwei	Consultant, Hongpeng Aviation
11:20-11:50	Development of New Materials for eVOL Electric Drive	General Manager	Sponsor
11:50-12:20	Power System Solutions for Low-Altitude Aircraft	Li Qing	Chief Engineer of Energy and Power & Director of Energy and Power Department, Volant Aircraft
12:20-13:30	Lunch	-	-
13:30-14:00	Application of Axial Flux in New Energy Ship Drive Systems	Wu Haiying	Chairman, Yikun Power
14:00-14:30	To Be Confirmed	General Manager	Sponsor
14:30-15:00	Marine New Energy Hybrid Power Technology	Zhang Xiaoyu	Senior Expert, Lvshui Xinhang Technology
15:00-15:20	Coffee Break	-	-
15:20-15:50	Development Technology of Marine Power Propulsion Motors	Li Baolai (To Be Confirmed)	Former Chief Engineer of Motors, China State Shipbuilding Corporation

IX. Standard Launch Meeting

Core Information

• Date: December 3, 2025 (13:30-17:30)

• Venue: InterContinental Yingyi Crown Holiday Hotel, No. 6555 Boyuan Road, Jiading District, Shanghai

• Theme: First Resolver/Eddy Current Standards in the New Energy Vehicle Industry ("Technical Requirements for Resolvers Used in New Energy Vehicles" and "Technical Requirements for Eddy Current Angle Sensors Used in New Energy Vehicles")

• Host Units: China International Economic and Technological Cooperation Promotion Association; Standardization Working Committee of China International Economic and Technological Cooperation Promotion Association

• Co-Organizer: Hunan Mi Aixi Measurement & Control Technology Co., Ltd.

• Participating Guests: Relevant leaders of China International Economic and Technological Cooperation Promotion Association, industry experts, representatives of standard drafting units

Significance

The Technical Requirements for Resolvers Used in New Energy Vehicles and Technical Requirements for Eddy Current Angle Sensors Used in New Energy Vehicles represent the first industry standards in the field of angle sensing for new energy vehicles. The convening of their launch conference marks the official kickoff of the standardization process for core power control components in global new energy vehicles, serving as a crucial milestone in industry development. Your high attention and in-depth participation are urgently needed.

1. Participate in Standard Formulation to Seize Dual Opportunities in Technology and Market

These two standards define core product performance indicators (such as the anti-interference capability of resolvers and the high-precision, low-latency requirements of eddy current sensors), reliability specifications for complex operating conditions (oil resistance, insulation, high-temperature adaptability, etc.), and automotive-grade safety standards. They will directly become the core basis for market access and product compliance testing both domestically and internationally in the future. By participating in the launch conference, you will be the first to grasp the drafting logic and technical orientation of the standards, accurately align your R&D direction, avoid product mismatch with market demands, and seize a first-mover advantage in the fierce industry competition.

2. Dominate Industry Discourse Power and Jointly Build Unified Global Technical Specifications

As core participants in the global new energy vehicle industry chain, the technical accumulation and practical experience of domestic and foreign manufacturers are critical to ensuring the scientificity and practicality of the standards. This launch conference serves as a cross-border, cross-enterprise communication platform, allowing you to directly participate in the discussion and revision of standard clauses. You can transform your enterprise’s technical advantages into industry rules, enhance your discourse power and influence in the global market, and promote the formation of unified specifications that take into account both domestic and foreign technical characteristics and adapt to global application scenarios.

3. Connect the Industrial Ecosystem to Expand Cooperation and Development Space

The launch conference will gather resources from the entire industry chain, including core domestic and foreign automakers, scientific research institutions, and testing organizations. Participation will not only enable you to deeply connect with the pain points and demands of downstream vehicle manufacturers, accurately match product R&D directions, but also establish long-term mechanisms for technical collaboration and market cooperation with industry partners. Together, we can address common industry challenges, promote the upgrading of resolver technology towards higher precision, reliability, and integration, and contribute to the high-quality development of the global new energy vehicle industry.

This standard launch conference is a significant opportunity for industry development and a key platform for manufacturers to showcase technical strength and layout future markets. We sincerely invite all domestic and foreign resolver manufacturers to actively participate, jointly discuss standard formulation, and envision the industry’s future. Let us lead technological innovation through standardization, explore broader market space through collaborative cooperation, and jointly build a standardized and high-quality development ecosystem in the global new energy vehicle angle sensing field!

Agenda

Time	Agenda
13:30-14:00	Registration
14:00-14:10	Host Li Qianjun (Director of Standard Department) introduces participating personnel
14:10-14:30	Opening Remarks by Liu Xutong (Deputy Secretary-General) and Chen Leshu (General Manager of Xuance Technology)
14:30-14:50	Li Qianjun introduces the project approval and compilation process of the standards
14:50-16:30	Discussion on standard texts
16:30-16:45	Meeting Summary by Liu Xutong
16:45-17:00	Group Photo
17:30	Dinner